Incubator controller combined temperature thermostat and humidity controller. The automatic incubator controller controls temperature, humidity and egg turning. It comes with both a temperature and a humidity probe. This is a high quality incubator controller, which offers precision and durability. This incubator controller boasts the following features:
- Controls temperature, humidity, egg turning and ventilation.
- High accuracy and precision.
- Alarm warning when temperature and humidity are outside set parameters.
- Working voltage: 180V – 240V (50Hz).
- Package Size: 20cm x 14cm x 12cm (8 in x 5.5 in x 5 in).
Range of temperature display: 5~50°C
Precision of Temperature control: ±0.1°C
Range of humidity display: 0-99%RH
Precision of humidity display: 1%RH
QTY of output circuits: 7 (overheat,heat control,low temperature,egg turning in left & right direction,humidity control,alarm) Output current: heat control, low temperature in 10A, others in 1A
Frequency of egg turning: Max record is 999 times.
Period of egg turning: adjustable between 0.1 and 99.9 hours (Factory setting: 1.5 hours)
Time of egg turning: adjustable between 1 and 255 seconds (factory default 180 seconds).
Package contains: Incubator controller with temperature and humidity control computer panel with free temperature and humidity sensors / probes.
FREE SHIPPING: 7 – 15 days
DHL Express Shipping: 4 – 8 days
Combined Incubator Thermostat Temperature and Humidity Controller
This Combined Incubator Temperature Thermostat and Humidity Controller brings you 2 products in 1. The combined automatic incubator controller controls both temperature and humidity. It is an incubator thermostat temperature controller, and an incubator humidity controller in one. No need to buy two separate controllers. Connect your heat source (heating element or bulbs) to the thermostat side, and connect your humidity source (water heater or fan) to the humidity side. It comes with both a temperature and a humidity probe. This is a high quality incubator controller, which offers precision and durability. This incubator controller boasts the following features:
- Perfect for egg incubators.
- Voltage 110V/220V.
- 3 metres (9 foot) long probe cables.
- This device controls a heat source to regulate the temperature.
- You can use a heating element or bulbs as your heat source.
Supply: 85~264 VAC,50-60HZ
Control output: 5A,250VAC(Resistance Load)
Temperature set range: 0-99.9°C
Humidity set range: 0-99.9%RH
Turn difference set: Temperature 0-9C, Humidity 1-9%RH
Accuracy: Temperature +-1C, Humidity +-5%RH
Ambient Temperature: -10C to 70C
Ambient Humidity: 45 to 85%RH
Mechanical Life: At least 3,000,000 times
Size: About 300g, (48*48*111) mm
Installation Mode: Panel mode, tapping size 45*45mm
Automatic Incubator Controller XM16 with free temperature and humidity sensors XM-16
The egg incubator controller XM16 automatic multifunction egg incubator control system with free temperature and humidity sensors. This incubator controller acts as an incubator thermostat temperature controller, incubator humidity controller, egg turner motor controller and ventilation controller. The XM-16 incubator controller is a fully intelligent PC control system which is designed and developed for egg incubators. It uses the latest micro-electronic technology, new electric parts and high-performance temperature and humidity sensors.
1. Temperature display range: 0–99 degrees Celsius
2. Temperature measurement precision: +/- 0.1
3. Humidity display range: 0–99% RH
4. Humidity control precision: +/- 3% RH
5. Output channels: 9-channel (over temperature, temperature control, low temperature, turn eggs left, turn eggs right, humidity control, alarm fan and light).
6. Output current: 10A for temperature control and low temperature and 1A for others
7. Length of measurement line: About 2 meters
8. Working voltage: AC 180V-240V, 50HZ
Free Accessories: Humidity sensor + temperature probe.